holosun 507k mounting footprintholosun 507k mounting footprint

The lowest two are NVD compatible. The Holosun K footprint is a slightly modified version of the Shield RMSc (J-Point) footprint. Press J to jump to the feed. I mean a weaver rail and a picatinny rail are technically not the same, but even so at least even they were labeled by the industry in a semi-consistent way. The Holosun EPS and EPS Carry both use the Holosun K footprint. I had to get some 6-32 1/2" screws from ACE hardware (shortest ones they had). When I don't properly vet a product to make sure it works for what I need, which I have done a couple of times,I don't blast the product or those who designed the product. I have one of the ch plates playing around. The6 MOA dot is really a good choice for use on small pocket-size guns that will typically be used at short ranges and sometimes in a rush. So from what you are telling me is you bought an optic you had no idea what the footprint was or what slide cuts it would fit. I've been very fortunate to have experience with a wide variety of firearms, gear, equipment etc. I believe it also fits the Hellcat off the shelf. I decided to give Holosun a shot and placed my pre-order. The footprint info and adapter modification starts around 6:20. Ultimately, in my view, the 507K is a well-designed feature-rich unit that does exactly what you want it to do, and at a good value for your money. Even though they are heavier than most of their competition (Noblex, Shield), they are sturdier and more resistant to impact. I stumbled across CHPWS also. SIG P320 RX / Pro Series / AXG to HOLOSUN 407k 507kThe C&H Adapter Plate allows you to mount your Holosun 407k 507k to your SIG P320 RX / Pro Series / AXG slide perfectly. So is the Shield RMSc. MRS: Circle Dot; 2 MOA Dot; 32 MOA Circle, Up to 50,000 Hours Battery Life (Setting 6), 12 Brightness Setting: 10 DL & 2 NV Compatible. Optics Trade. Article Name. I wouldn't say that it makes the image 'crowded'. /ProcSet [/PDF /ImageB /Text] Holosun's latest offering is the Enclosed Pistol Sight, or EPS line, of red-dot sights. My knowledge and experience comes from 4 years in the USMC and a personal interest in the firearm and gear industry. HMMM? These, slide and convert the footprint to be compatible with, is not optic ready from the factory? Come on Holosun, really? A small dot provides minimum coverage and is great for accuracy, a big dot provides more coverage but is easier to track (bigger, more visible). While no piece of gear is going to be perfect for everyone and you can nitpick even the best of equipment, as far as Im concerned Holosun got this one very right. I hold out for a new 507k for a Brownells slide on a 48 frame. They are both polymer housings, so neither are waterproof or sweat proof, and theyre not durable for impact. Doesnt fit any of the existing footprints, and they expect you to grind and drill on some of the smaller guns. What is not ok,is the headline of you post and your rant about how"Holosun seriously screwed the pooch on this one. Thank you for your feedback,looking forward to hearing your thoughts. Soon after, I brought home one of my own, and given SIGs inclusion of an optics-ready slide, I elected to equip it with a red dot. . /Resources << . The screws to mount the red dot to the plate are provided at no extra cost. Pasted as rich text. Lifelong hobby/sport shooter and hunter, former US Army infantryman, perpetual firearms student. Hey guys, just picked up my 509 midsize mrd and was mounting a Holosun 507K. Buy mount: Holosun 507K X2: Unique (modification of the Shield standard) Buy now: Buy mount: Footprint: Holosun 508T: Trijicon RMR standard: Find the new model here: Buy mount: . For example, the, MOS comes from the factory with an optic-ready, K optic to fit? The footprint for the Holosun 407K/507K informatin was available and known at Shot Show 2020. Its like its a secret. I'm going to talk with both Holosun & CHPWS about this to see if I go that route. Only time will tell if its durable. . I think you might of ordered the wrong dot. You would then have to shorten the front recoil lugs to a certain extent in order to fit within the much shallower holes on Holosun K optics. The X2 Series pistol optics feature two improvements. My slide has been completedand should be back to me this week. Especially since Holosun just released their 407C/507C which is an upgrade of their current full-size sights. We are not Holosun but a blog that writes about optics. Always seeking to become better and learn more. the 'C' model has the Trijicon RMR mounting standard while the 'K' model features a modification of the Shield . Attachment/Mount Type: Shield RMS Footprint: Battery Type: CR1632: Battery Quantity: 1: Battery Life: 50,000 hours: Operating Temperature:-30 - 60 Celsius: Water Resistance Level: IP67: Weight: 1 oz: The Glock MOS is setup for the RMSC, and while the 507k shares a similar footprint, the 507k does not have the recesses in the rear for the posts, and the front recesses are shorter than the Glock posts. Note: 507k does NOT use an rmsc footprint. Therefore,people can have a real understanding that Holosun makes good products and people who use their optics order the correct one for the appropriate application and seem to have zero issue with what they ordered. That same small flathead side of this tool also opens the battery tray, and the other head is a T10 Torx which fits the screws securing the dot to the guns slide. Site picture do you find the smaller site picture cluttered/crowded when using circle dot? All Rights Reserved. The fact you are even mentioning swampfox for a carry gun is. Regular Price $399.99 Special Price $319.99. There is a reason it is small. This plate is required to mount a Holosun 507k / 407k without having to modify the existing recoil posts on the slide. These are the first Holosun red dots to use a smaller, CR1632 battery. Like all the currently produced Holosun red dot sights, 407K and 507K feature 12 illumination intensity settings. Your email address will not be published. Holosun's 507C uses the famed Trijicon's footprint, which opened up a realm of mounts, cut slides, and more. . I am absolutely keeping it on my EDC gun for the foreseeable future. Hopefully youordered the correct one. This plate is not compatible with ZEV Posts.This plate comes with the CHPWS Patented T-Post Design Feature. Was about to pull the trigger on one thinking it would use the RMR footprint, doh. If you dont care to do the research it is not their fault if you purchase the incorrect optic for yourrequired application. It's the best because it's a rugged and reliable optic. The Holosun EPS and EPS Carry both use the Holosun K footprint. Designed exclusively to fit Holosun 407k/507k and any red dot with the same footprint. The EPS (Enclosed Pistol Sight) is available in a Full-Sized and a Carry Sized Version. Could you send me a link? . I shouldn't have to call up customer support to know what I'm buying, and that is more or less the current state of the industry regarding MRDs. Consumers have taken notice, as have competitors, with Holosuns pistol red dots, in particular,seeming to be gaining a fair amount market share. Your link has been automatically embedded. In no time at all, I had removed my SIGs slide, backed out the two plate screws from underneath, and replaced the cover plate and rear sight with the Holosun 507K. I seem to be getting mixed information as I am looking for a direct fit without an adapter plate or milling the lugs off. [ARCHIVED THREAD] - Holosun 507k Footprint. They had to do that to make the sight waterproof. Send them this link: https://www.optics-trade.eu/blog/holosun-407k-x2-footprint/, Hi.. i need a mount for 507k in Cz Shadow 2. The 507K . 0.7 cm at 50 m (1/2 MOA per click). It is really small but the dot is plenty bright and clear. I've actually had my 507K replaced under warranty. Holosun seriously screwed the pooch on this one. Now, Holosun pretty much offers a red dot sight for all types of use. Holosun did a warranty replacement and I mounted it. The C&H V4 Adapter Plate allows you to mount your Holosun 407K or 507k to an RMR footprint optics cut. January, 2023 at 7:39. I'll report on how it came out and how it works soon. Sig P365XL and the Hellcat primarily. EQUIPMENT INCLUDES: HS507K-X2 Classic Multi Reticle Red Dot Sight in Black, multi tool, lens cloth, and user manual. The size of the mounting standard is similar to Shield RMS/SMS, Leupold Delta Point Pro, Holosun 407/507K, etc. Unboxing the Holosun 507K, with the red dot and other package contents laid out. I have a shield plus with the Holosun 507k mounted using their plate. Do u make a 407k model that is solar failsafe and green dot? Ive read both. Their new dedicated pistol sight is kinda small. The EPS features our lowest deck height, facilitating use with standard height iron sights on many pistol models. How did it work out for you? The screws that come with the 507k also did not work well with the optics cut. I went ahead and ordered the Shield 2.0 plate from CHPWS even though it's on backorder and might not work out of the box. LONG BATTERY LIFE: Features includes a SUPER LED high capacity lithium battery to power the optic with up to . I accept accountability for my error and fix the issue. I was looking at Holosun 507k x2 but it says its a modified RMS footprint. Types of Mounting Footprints. Holosun has finally come up with a perfect, compact red dot sight for pistol use. Holosun has many other optics that fit standard sized pistols, and have been on the market for a number of years. when that statement is". No modifications required for that optic on that pistol. I bought the swampfox ultimate red dot screw kit for $20 which has the perfect length screws in it and came as a kit with a ton of hardware to mount any optic to any pistol as well as extra long hardware to diy your own length if need be. Holosun 507K is compatible with Shield RMSc/RMS/RMSw/SMS, Sig Romeo Zero Optic, JP Jpoint Optic footprints, cuts, or mounting plates. 10 0 obj They do have the green illumination model in their offer, though. So maybe if a few more people called them out, and stopped buying their products the suits would start asking designers and marketers whats going on, or get some new ones and stop alot of this nonsense, This is true. %PDF-1.5 Springfield Hellcat Adapter Plate This is the optics adapter plate for the newly released Springfield Hellcat with RMSc Optic Cut. Do you know why? You cannot paste images directly. Although it had previously looked good in theory, my real 507K trial began here. I have 3 of each and they all fit the milling/mounts I have. In the early days following their founding just seven years ago, Holosuns optics sat firmly in the budget category. You won't have any trouble getting this RMSc footprint onto your weapon. ), You just need to trim the front 2 down a little. when that statement is"More not true". HOME / PRODUCTS / . HS507K. Feb 25, 2021. Too bad, it looked like a great green dot. The only one I found was on backorder for god knows how long. The RMRcc is longer and the hole pattern is different. I think that Holosun currently does not make a 407K model with a solar cell. I hadnt made the jump to pistol red dots prior to my purchase of a SIG Sauer P365XL at the beginning of this year. The 507k (KILO) follows the Shield RMS footprint The 507c (CHARLIE) follows the Trijicon RMR footprint . For this reason, we have declared the author for all reviews created in the old system as "Legacy Reviewer". If you're talking about the nerf gun, just superglue an ultra cheap RD sight to the unit. Also can you confirm that the thread size needed is indeed 6-32 and not 4-40? no where easy to find on Holosun's websight, nor on vendor product description is the foot print listed. % The threaded holes will not break into any of . The best Glock 43X MOS red dot is the Holosun 507K X2. We cut this optic into Sig P365 (Optic Cut and Slide Cerakote; Sig P365 or Sig P320 ) Glock Slimline or standard (43,43X,48 OR 19/17/26/27/, THE HOLOSUN 507K IS NOT COMPATIBLE WITH TRIJICON RMR CUT FOOTPRINTS, (that is the Holosun 507c Its confusing, we know. Am I F-ing this up? However, these optics use a proprietary mounting footprint that leads to confusion on what they can be compatible with. If you have an account, sign in now to post with your account. 407/507K Adapter for RMR. One high quality CR1632 Lithium battery is included with . Place the HS507K on a compatible slide cut or adapter plate (this varies based on your slide . Thanks for subscribing to our newsletter! Given that the RMRcc has to be removed to change batteries like its big brother, doesn't have the features of the Holosun (such as multiple reticle options), uses a proprietary footprint requiring a separate mount, and costs significantly . However, this isthe description of the optic on various websites. Even well into adulthood, in Army training with the M9 or concealed carrying my Glock 19 and all the other pistol shooting Id done to this point, it was all irons. I'm in the same boat. As of 11/7/21, there are no adaptor plates made specifically for this combination. The loss of factory rear sight was a non-issue, as the Holosun has an integrated backup sight. Holosun's red dot sights are becoming more and more popular with time. I give Midway credit for maintaining their published price and having free shipping despitethe scarcity of these sights. NOTE: HS507K is compatible with some standard mounting . The mounting holes between the two footprints are identical meaning that optics cut for the Shield RMSc footprint will allow any Holosun K footprint optic to line up with the mounting holes. Add to . As Low As (Save Up to 47%). These adapter plates are designed to fit your Shield RMSc optic cut slide and convert the footprint to be compatible with Holosun K footprint optics. Lock Mode, when activated, locks the buttons preventing inadvertent setting changes. The HS507K X2 is an open reflex optical sight designed for concealed carry pistol applications.

Hackman Funeral Home Sturgis, Michigan Obituaries, Articles H